Beach Cruiser Maintenance

The Chain

Mud, grime and salt water can break down bike parts. The chain will final for much longer with thorough cleansing and lubrication on a daily schedule. Previous to cleansing your chain guarantee you may have the suitable instruments for the job. A superb degreaser, Easy Inexperienced works effectively, won’t injury the chain. A series brush or previous toothbrush to clean. A towel for wiping of grease. And naturally chain lubricant for relubing the chain as soon as the chain is cleaned. To wash the chain combine 1 half water with 1 half degreaser. You’ll be able to combine this right into a bucket or cup. Dip the toothbrush or chain brush into the degreaser combination. Scrub the chain and sprockets to take away any constructed up grease or particles. As soon as cleaned wipe down the chain and sprockets. To lube the chain it is strongly recommended to spray the lube whereas spinning the again tire. I like to recommend lubing all shifting elements and joints of the chain. Wipe up any entry lube when chain lubrication is full.

Brakes

Examine the brake pads to make sure they don’t seem to be excessively worn. If worn and never making good contact exchange the brake pads. In case your bike has a hand brake then clear the brake cable. Guarantee there may be not extreme grease or particles constructed up on the finish of the cable.

Derailer (If 7 velocity bike)

The derailer could be cleaned much like the chain. The derailer doesn’t must lubricated. It would require degreasing if there may be extreme construct up of grease or particles.

Tires

It’s endorsed to verify the tire stress earlier than every trip. Tires can lose stress in a single day. Get a good flooring pump and verify every day. The PSI (kilos per sq. inch) might be indicated on the aspect of the tire. Additionally it is a good suggestion to have a look at the tires and verify for injury or extreme put on. Correctly inflated and maintained tires will last more.

Bike Lubrication

The next areas will have to be lubricated a minimum of yearly: Derailers, All levers, All cables, Any shifting elements of the chain.

Additionally verify all nuts, bolts, seat stem and deal with bar stem for loosening and extreme put on. This needs to be finished a minimum of yearly however extra typically if driving in muddy, sandy or moist areas.

Clear your bike typically to maintain it working effectively and searching good. A pleasant teflon or silicone bike polish will assist to keep up your bike sheen, make it look nice and assist shield the paint. Merely clear the bike with water, observe the steps above for sustaining your chain, brake and tires then apply polish. Benefit from the Trip!

You may also like...

Leave a Reply