DIY UV disinfection box for N95 masks and other equipment, fight coronavirus video!

On this video I am going to present you tips on how to make a DIY ultraviolet disinfection and sterilization field utilizing widespread supplies discovered round the home. This can be utilized to disinfect used N95 masks and different gadgets that could be contaminated with coronavirus (COVID-19), or different pathogens. The entire value of the supplies for this challenge is lower than $120. You can also make a field for your self, otherwise you may give one to your native hospital, clinic, hearth, or police division to assist them out.

3D printing recordsdata (obtain FREE to 3D print your self. If you wish to order printed for you, you are able to do that as nicely on the hyperlink):
2 masks holder:
1 masks holder:
2 masks holder, set of 6:
1 masks holder, set of 6:

Supplies for this construct (As an Amazon Affiliate, we earn from qualifying purchases, thanks on your help!)

UVC LAMPS!
1) 14″ UV germicidal lamp (could also be offered out):
2) Different 60W LED UV lamp w commonplace E26/E27 socket:
*E26/E27 gentle socket (wanted for the 60W lamp above):
3) Some individuals report success with fishtank UVC lamps (I have not personally tried them). They’re low energy and you need to modify your light-on time to compensate for the decrease energy.
4) Right here is one other fishtank UVC lamp, additionally decrease energy however the appropriate UVC wavelength

Brinks digital timer
Heavy Obligation aluminum foil:
Gorilla glue:
Machine screws and nuts (use #6):
Washer set:
Adhesive velcro-type tape:
Hook and loop cable ties:
Giant cardboard packing containers:
Packing tape:
White spray paint:
Silver spray paint:

Nothing on this video needs to be interpreted as medical recommendation. This is not an FDA-approved technique of sterilizing or disinfecting medical gear. Use acceptable care when working with UV gentle.

source

You may also like...

Leave a Reply